Soapstone Counters With a Wood Counter Top - Soapstone Werks

Complete Guide for Soapstone Countertops - Arch City Granite

How to Install a Soapstone Countertop - This Old House for Beginners

After you have actually made a small groove with the hole saw, stop cutting and wedge an ice inside the saw to cool the blade and keep dust down as you drill. Brace the Sink Cutout Before cutting the long sides of the cutout, brace the center piece so it doesn't fall and snap the stone as you work.

Put a piece of scrap wood enough time to cover the two notches and go past the cutline for the cutout under the stone, and clamp it in location through the notches. With the brace in place, cut the two long sides. Get the waste piece of the cutout through the notches, and lift it out.

Some Ideas on How to Care for Soapstone Kitchen Countertops: A Guide You Need To Know

Preparation the Seam Wherever two pieces of stone will meet at a seam, cut a series of 1/8-inch-deep slits along the edge, using a mill fitted with a diamond blade. Area them about an inch apart, on both faces of mating slabs. Cut Slots for the Sink Bolts Thoroughly turn the piece on edge and prop it up, exposing the underside.

Utilizing a grinder, cut short, 1/8- to 1/4-inch-deep grooves at your marks. With the wheel in the groove, tilt the grinder sharply to either side to make a small pocket inside the stone. Leave one end of the groove wide sufficient to move the head of a sink bolt into the groove.

Cost of Soapstone Countertops - Calculate 2021 Prices Free Things To Know Before You Get This

Slide the head of the bolt into the grooves around the cutout and inspect that the clip will reach close enough to the cutout to brace the flange of the undermount sink. Get rid of these bolts and clips, and set them aside before moving the stone.  View Details .